Downloadable Order Form

Home

TEI News Page

Controls Parts

Energy Management

ASI Controls Building Automation

ASI Telco Panel

Bard Wall-Mount and HVAC Equipment

Bard HVAC Parts Supply

Bard Controllers

Nesbitt Equipment

Gas Detection

Environmental Monitors

The Dry Contact Input RIB series offers all the advantages of the standard RIB line; plus, it can be activated by a wide range of dry-contacts such as thermostats, switches, other relays, solid-state switches, etc. The Dry Contact Input RIB provides the low-voltage (Class 2) power needed to activate the relay (self-powered) – just close the dry-contact input. The power to energize the relay can be brought to the relay on a separate pair of wires along with the control output of the controller, or can be a local power source near the relay. The relay contacts are isolated from the input power and the dry contact input; thus, they can be wired to switch any other power-load or low-voltage load (see specifications for contact ratings). One model can be used for many installations (model RIB21CDC can operate from any voltage from 120Vac – 277Vac; see specifications for the input power of other models).

                                            Return to Homepage                                                    Contact Us

Send mail to amberb@telcoenvirotrols.com with questions or comments about this web site.
Last modified: 05/07/08